EVERGREEN

Joint Journal of Novel Carbon Resource Sciences and Green Asia Strategy

ISSN:2189-0420 (Print until Mar 2020)
ISSN:2432-5953 (Online)

SCImago Journal & Country Rank

Open Access
Scopus
Google Scholar
Crossref
SCImago Journal & Country Rank
4.3
2024CiteScore
 
69th percentile
Powered by Scopus
Metrics by SCOPUS 2024
CiteScore
4.3
SJR
0.391
SNIP
1.192


Effects of Primary Aromatic and Primary Aliphatic Amines on the Formation of Cardanol-Based Benzoxazine Monomers Based on Fourier-transform Infrared and Raman Spectroscopy

Dini Harsanti1,2,*, Anne Zulfia Syahrial1, Yudi Nugraha Thaha3, Bagus Hayatul Jihad4, Joddy Arya Laksmono2
1Department of Metallurgical and Materials Engineering, Universitas Indonesia (UI), Indonesia
2Research Center for Polymer Technology, National Research and Innovation Agency (BRIN), Indonesia
3Research Center for Metallurgical, National Research and Innovation Agency (BRIN), Indonesia
4Research Center for Rocket Technology, National Research and Innovation Agency (BRIN), Indonesia
*Author to whom correspondence should be addressed:
E-mail: dini.harsanti@ui.ac.id (DH)
Received: June 10, 2025 | Revised: August 06, 2025 | Accepted: December 17, 2025 | Published: December 2025
Abstract
High-performance benzoxazine monomers are presenting an interesting challenge in polymer science. The demand for natural phenols, such as cardanol is growing due to shrinking petroleum resources and rising concerns about environmental sustainability. This analysis examines the effects of aromatic and aliphatic amines on the formation of cardanol-based benzoxazine monomers. During the analysis, four benzoxazine precursors prepared from cardanol-aniline (C-an), cardanol-furfurylamine (C-fu), cardanol-laurylamine (C-la), and cardanol-stearylamine (C-sa) were separately reacted with paraformaldehyde via a Mannich condensation reaction mechanism. The functional groups and crystallinity degree of the benzoxazine monomers were investigated using nonlinear Gaussian deconvolution of the fourier transform infrared (FTIR) and Raman spectra. The results indicated cardanol-based benzoxazine synthesized with furfurylamine contained a higher number of oxazine rings than that with aniline, laurylamine, and stearylamine. The Raman spectral analysis showed that the double bond in the carbon structure of the furan ring derived from furfurylamine occurred at the Raman shift of 1505 cm-1. Consequently, the double bond in the carbon structure of the benzene ring originated from aniline and occurred at the Raman shift of 1600 cm-1. The benzoxazine monomer synthesized with furfurylamine showed a degree of crystallinity of 54.49%, signifying a higher number of benzoxazine molecules due to the reactivity of the furan rings in the oxazine ring formation process.
Keywords
aliphatic amines; aromatic amines; benzoxazine; cardanol; degree of crystallinity
Available Repositories
Share Article
Article Metrics
--
Views
--
Downloads
--
Citations
Full Text
Download PDF
References
  1. 1) S.P. Asrafali, T. Periyasamy, C.J. Raorane, R. Vanaraj, V. Raj, and S.C. Kim, "Development of hybrid titania/polybenzoxazine composite for enhance thermomechanical, flame retardancy and dielectric properties," Sustainability (Switzerland), 15 (2) (2023) doi:10.3390/su15021639
  2. 2) I. Machado, C. Shaer, K. Hurdle, V. Calado, and H. Ishida, "Towards the development of green flame retardancy by polybenzoxazines," Prog Polym Sci, 121 (2021) doi:10.1016/j.progpolymsci.2021.101435
  3. 3) A. Adjaoud, L. Puchot, C.E. Federico, R. Das, and P. Verge, "Lignin-based benzoxazines: a tunable key-precursor for the design of hydrophobic coatings, fire resistant materials and catalyst-free vitrimers," Chemical Engineering Journal, 453 (2023) doi:10.1016/j.cej.2022.139895
  4. 4) F. Li, W. Zhang, and J. Wang, "High-tg bio-based polybenzoxazine derived from renewable anethole and furfurylamine," Eur Polym J, 199 (2023) doi:10.1016/j.eurpolymj.2023.112466
  5. 5) Y. Bi, L. Zu, Z. Zhang, L. Zhang, B. Zhao, S. Cong, T. Lan, S. Dong, Y. Wang, and J. Xu, "Multifunctional biobased benzoxazines: synthesis, copolymerization, and thermal stability studies," ACS Appl Polym Mater, 6 (7) 4282-4289 (2024) doi:10.1021/acsapm.4c00404
  6. 6) P. Thirukumaran, A. Shakilaparveen, and M. Sarojadevi, "Eugenol-Based Polybenzoxazines," in: Advanced and Emerging Polybenzoxazine Science and Technology, Elsevier Inc., 2017: pp. 523-531 doi:10.1016/B978-0-12-804170-3.00027-5
  7. 7) R. Yang, M. Han, B. Hao, and K. Zhang, "Biobased high-performance tri-furan functional bis-benzoxazine resin derived from renewable guaiacol, furfural and furfurylamine," Eur Polym J, 131 (2020) doi:10.1016/j.eurpolymj.2020.109706
  8. 8) M. Derradji, K. Khiari, O. Mehelli, S. Abdous, B. Amri, R. Belgacemi, N. Ramdani, A. Zegaoui, and W. Liu, "Green composites from vanillin-based benzoxazine and silane surface modified chopped carbon fibers," Polymers from Renewable Resources, 14 (1) (2023) doi:10.1177/20412479221147052
  9. 9) T. Periyasamy, S.P. Asrafali, and S.C. Kim, "Bio-based polybenzoxazine–cellulose grafted films: material fabrication and properties," Polymers (Basel), 15 (4) (2023) doi:10.3390/polym15040849
  10. 10) C. Zhang, J. Xue, X. Yang, Y. Ke, R. Ou, Y. Wang, S.A. Madbouly, and Q. Wang, "From plant phenols to novel bio-based polymers," Prog Polym Sci, 125 (2022) doi:10.1016/j.progpolymsci.2021.101473
  11. 11) I. Machado, I. Hsieh, E. Rachita, M.L. Salum, D. Iguchi, N. Pogharian, A. Pellot, P. Froimowicz, V. Calado, and H. Ishida, "A truly bio-based benzoxazine derived from three natural reactants obtained under environmentally friendly conditions and its polymer properties," Green Chemistry, 23 (11) (2021) doi:10.1039/d1gc00951f
  12. 12) S. Khan, S. Masood, A. Ghosal, M. Azam, M. Alam, F. Zafar, Q.M.R. Haq, and N. Nishat, "Mechanically robust and antibacterial coatings constructed from cardanol-aliphatic amine based metal-coordinated nanostructured framework," Prog Org Coat, 188 (2024) doi:10.1016/j.porgcoat.2024.108244
  13. 13) H. Srinivasan, H. Arumugam, S. Rimdusit, and A. Muthukaruppan, "Bio-thymol containing new high-performance thymolphthalein based polybenzoxazine: thermal, superhydrophobic and dielectric properties," Colloids Surf A Physicochem Eng Asp, 675 (2023) doi:10.1016/j.colsurfa.2023.131947
  14. 14) A. Trejo-Machin, A. Adjaoud, L. Puchot, R. Dieden, and P. Verge, "Elucidating the thermal and polymerization behaviours of benzoxazines from lignin derivatives," Eur Polym J, 124 (2020) doi:10.1016/j.eurpolymj.2019.109468
  15. 15) H. Arumugam, B. Krishnasamy, G. Perumal, A.D. A, M.I. Abdul Aleem, and A. Muthukaruppan, "Bio-composites of rice husk and saw dust reinforced bio-benzoxazine/epoxy hybridized matrices: thermal, mechanical, electrical resistance and acoustic absorption properties," Constr Build Mater, 312 (2021) doi:10.1016/j.conbuildmat.2021.125381
  16. 16) E. Calò, A. Maffezzoli, G. Mele, F. Martina, S.E. Mazzetto, A. Tarzia, and C. Stifani, "Synthesis of a novel cardanol-based benzoxazine monomer and environmentally sustainable production of polymers and bio-composites," Green Chemistry, 9 (7) 754-75 (2007) doi:10.1039/b617180j
  17. 17) Y. Xing, X. He, R. Yang, K. Zhang, and S. Yang, "Design of high-performance polybenzoxazines with tunable extended networks based on resveratrol and allyl functional benzoxazine," Polymers (Basel), 12 (12) 1-10 (2020) doi:10.3390/polym12122794
  18. 18) H.A. Klfout, A.M. Asiri, K.A. Alamry, and M.A. Hussein, "Recent advances in bio-based polybenzoxazines as an interesting adhesive coating," RSC Adv, 13 (29) 19817-19835 (2023) doi:10.1039/d3ra03514j
  19. 19) R. Ganfoud, N. Guigo, L. Puchot, P. Verge, and N. Sbirrazzuoli, "Investigation on the role of the alkyl side chain of cardanol on benzoxazine polymerization and polymer properties," Eur Polym J, 119 (2019) doi:10.1016/j.eurpolymj.2019.07.026
  20. 20) W. Li, and W. Jiang, "Methods for preparing benzoxazines using aqueous solvent," United States Patent, (2012)
  21. 21) E.. Buncel, and R.A.. Stairs, "Solvent effects in chemistry," Wiley, 2016
  22. 22) M. Anjalin, N. Kanagathara, and A.R. Baby Suganthi, "A brief review on aniline and its derivatives," in: Mater Today Proc, Elsevier Ltd, 2020: pp. 4751-4755 doi:10.1016/j.matpr.2020.08.358
  23. 23) H. Ishida, and Y. Rodriguez, "Curing kinetics of a new benzoxazine-based phenolic resin by differential scanning calorimetry," 1995
  24. 24) A.B.D. Nandiyanto, R. Oktiani, and R. Ragadhita, "How to read and interpret ftir spectroscope of organic material," Indonesian Journal of Science and Technology, 4 (1) 97-118 (2019) doi:10.17509/ijost.v4i1.15806
  25. 25) A.B.D. Nandiyanto, R. Ragadhita, and M. Fiandini, "Interpretation of fourier transform infrared spectra (ftir): a practical approach in the polymer/plastic thermal decomposition," Indonesian Journal of Science and Technology, 8 (1) 113-126 (2023) doi:10.17509/ijost.v8i1.53297
  26. 26) Z. Xu, Y. Takahashi, and A. Takada, "Elastic modulus of the gel made from interpenetrating polymer networks in phase separated state," Evergreen, 1 (1) 1-5 (2014) doi:10.5109/1440968
  27. 27) P.P. Chiplunkar, and A.P. Pratap, "Utilization of sunflower acid oil for synthesis of alkyd resin," Prog Org Coat, 93 61-67 (2016) doi:10.1016/j.porgcoat.2016.01.002
  28. 28) S. Devaraju, K. Krishnadevi, S. Sriharshitha, and M. Alagar, "Design and development of environmentally friendly polybenzoxazine–silica hybrid from renewable bio-resource," J Polym Environ, 27 (1) 141-147 (2019) doi:10.1007/s10924-018-1327-z
  29. 29) R. Lestari, D. Wahyuningsih, and I. Kartini, "High Quantum Yield Nitrogen-Carbon Dots (N-CDs) from Plastic Waste," 2023
  30. 30) L.R.V. Kotzebue, F.W.M. Ribeiro, V.G. Sombra, J.P.A. Feitosa, G. Mele, S.E. Mazzetto, and D. Lomonaco, "Spectral and thermal studies on the synthesis and catalyzed oligomerization of novel cardanol-based benzoxazines," Polymer (Guildf), 92 189-200 (2016) doi:10.1016/j.polymer.2016.04.005
  31. 31) D. Lin-Vien, N.B. Colthup, W.G. Fateley, and J.G. Grasselli, "Alkanes," in: The Handbook of Infrared and Raman Characteristic Frequencies of Organic Molecules, Elsevier, 1991: pp. 9-28 doi:10.1016/b978-0-08-057116-4.50008-0
  32. 32) A. Gandini, D. Coelho, M. Gomes, B. Reis, and A. Silvestre, "Materials from renewable resources based on furan monomers and furan chemistry: work in progress," J Mater Chem, 19 (45) 8656-8664 (2009) doi:10.1039/b909377j
  33. 33) Fitri Ayu Radini, Dwi Novriadi, David N. Vicarneltor, Ara G. Rizkyta, Annisa Rifathin, Zarlina Zainuddin, Ade Pratama, Ade M. Wijaya, Reza Pahlevi Rudianto, and Riana Y.H. Sinaga, "Sustainable pallets from flexible multilayer plastic waste: a response surface and finite element analysis approach," Evergreen, 12 (1) 594-607 (2025) doi:10.5109/7342478
  34. 34) E.R. Dyartanti, I.N. Widiasa, A. Purwanto, and H. Susanto, "Nanocomposite polymer electrolytes in pvdf/zno membranes modified with pvp for use in lifepo4 batteries," Evergreen, 5 (2) 19-25 (2018) doi:10.5109/1936213
  35. 35) D. Ariawan, W.P. Raharjo, K. Diharjo, W.W. Raharjo, and B. Kusharjanta, "Influence of tropical climate exposure on the mechanical properties of rhdpe composites reinforced by zalacca midrib fibers," Evergreen, 9 (3) 662-672 (2022) doi:10.5109/4842526
  36. 36) W. Wattanathana, Y. Hanlumyuang, S. Wannapaiboon, K. Chansaenpak, P. Pinyou, T. Nanok, and P. Kanjanaboos, "Novel dihydro-1,3,2h-benzoxazine derived from furfurylamine: crystal structure, hirshfeld surface analysis, photophysical property, and computational study," Crystals (Basel), 11 (5) (2021) doi:10.3390/cryst11050568
  37. 37) D. Supramono, and J. Edgar, "Characteristics of non-polar bio-oil produced by co-pyrolysis of corn cobs and polypropylene using co2 as carrier gas," Evergreen, 6 (1) 78-84 (2019) doi:10.5109/2328407
  38. 38) J. Wang, Q. Liu, J. Yu, R. Xu, C. Wang, and J. Xiong, "Synthesis and characterization of benzoxazine resin based on furfurylamine," Materials, 15 (23) (2022) doi:10.3390/ma15238364
  39. 39) P. Madesh, S. Ramachandran, S. Appasamy, B. Krishnasamy, K. Muthu, and A. Muthukaruppan, "Valorization of agricultural waste to polybenzoxazine-carbon composites: studies on microstructure, thermal and dielectric properties," Eur Polym J, 197 (2023) doi:10.1016/j.eurpolymj.2023.112355
  40. 40) E. Smith, and G. Dent, "Modern Raman Spectroscopy-A Practical Approach," n.d
  41. 41) K.S. Salem, N.K. Kasera, M.A. Rahman, H. Jameel, Y. Habibi, S.J. Eichhorn, A.D. French, L. Pal, and L.A. Lucia, "Comparison and assessment of methods for cellulose crystallinity determination," Chem Soc Rev, 52 (18) 6417-6446 (2023) doi:10.1039/d2cs00569g
  42. 42) O.N. Tretinnikov, and S.A. Zagorskaya, "Determination of the degree of crystallinity of poly(vinyl alcohol) by ftir spectroscopy," J Appl Spectrosc, 79 (4) 521-526 (2012) doi:10.1007/s10812-012-9634-y
  43. 43) M. Doumeng, L. Makhlouf, F. Berthet, O. Marsan, K. Delbé, J. Denape, and F. Chabert, "A comparative study of the crystallinity of polyetheretherketone by using density, dsc, xrd, and raman spectroscopy techniques," Polym Test, 93 (2021) doi:10.1016/j.polymertesting.2020.106878
  44. 44) E. Tarani, I. Arvanitidis, D. Christofilos, D.N. Bikiaris, K. Chrissafis, and G. Vourlias, "Calculation of the degree of crystallinity of hdpe/gnps nanocomposites by using various experimental techniques: a comparative study," J Mater Sci, 58 (4) 1621-1639 (2023) doi:10.1007/s10853-022-08125-4
  45. 45) C. Qian, Y. Zhao, Z. Wang, L. Liu, and D. Wang, "Probing the difference of crystalline modifications and structural disorder of isotactic polypropylene via high-resolution ftir spectroscopy," Polymer (Guildf), 224 (2021) doi:10.1016/j.polymer.2021.123722
Other Papers in This Issue